Servisneva.ru

Сервис Нева
2 просмотров
Рейтинг статьи
1 звезда2 звезды3 звезды4 звезды5 звезд
Загрузка...

Ошибка 0x800F081F при установке. NET Framework 3. 5 в Windows 8 /Server 2012

Ошибка 0x800F081F при установке .NET Framework 3.5 в Windows 8 /Server 2012

date28.10.2014
useritpro
directoryWindows 8
commentsкомментариев 10

Не секрет, что в Windows 8 / Windows Server 2012 / R2 .Net Framework 3.5 не идет в комплекте поставки ОС (в рамках концепции Features on Demand), и для его установки требует дистрибутив ОС или прямой доступ к сайту обновлений Microsoft. В одной из предыдущих статей мы уже показывали, как установить .NET Framework 3.5 в Windows Server 2012 R2 / Windows 8. На днях сразу на нескольких системах столкнулись с ошибкой установки .Net Framework 3.5. Проблема наблюдалась при установке компонента как на серверной Windows Server 2012, так и на клиентской Windows 8.1.

Что самое интересное, победить проблему получилось разными методами : ).

Нажмите клавиши Windows + R или выберите Пуск, введите команду «Выполнить» и выберите её.

Введите printmanagement.msc и нажмите ввод или нажмите кнопку ОК.

Если открывается «Управление печатью», перейдите к шагу 4. Если вы получили сообщение об ошибке, Windows не может найти файл printmanagement.msc. затем выберите Пуск, введите «Управление дополнительными функциями» и выберите её. Выберите «Добавить компонент» и введите «Печать», установите флажок рядом с «Консолью управления печатью» и выберите «Установить». Теперь вам нужно будет снова начать с шага 1.

Разверните «Серверы печати», разверните имя своего компьютера и выберите элемент «Принтеры». Теперь вы можете увидеть тип драйвера для каждого из установленных драйверов принтера в правой колонке.

Fix: Windows 10 Update Error 0x800f081e

The Windows Spring Creators Update was expected by a lot of Windows 10 users. But when it finally became available via WU (Windows Update), some users were unable to complete the installation of the update.

Most users that are unable to apply the Spring Creators Update (version 1803) report receiving the 0x800f081e error. Error 0x800F081E is a Windows status code for CBS_E_NOT_APPLICABLE, which essentially means that an update requirement is missing or the files that are already installed are already of a higher version than the ones that are pending.

Note: The 0x800F081E error is mostly reported to occur on Windows 10 N.

When the update fails, the installation wizard doesn’t provide you with additional clues on why the update couldn’t be installed. “0x800F081E – 0x20003 The installation failed in the Second_Boot phase with an error during Boot Operation” doesn’t really point you towards the source of the problem. But if you check the log file of the update, you should discover an error message similar to this one (sometimes it’s listed several times):

Note: The log file can be found in C:$WINDOWS.

BTSourcesPanther. To view the update log, navigate to this location and open the file named setuperr.log with a text viewer/editor like Notepad.

From these lines, it becomes apparent that the update is seen as inapplicable because of the Windows Media Player package. After investigating the issue, it seems like most users encountering the 0x800F081E error when applying the Spring Creators Update (version 1803) have linked it with the Windows Media Player Package.

If you’re currently struggling with the same issues, we have managed to identify a couple of methods that will enable you to get past the 0x800F081E error and install the Spring Creators Update (version 1803). Altough all the methods will ultimately help you achieve the same end goal, it’s recommended that you follow the three potential fixes in order. If Method 1 doesn’t manage to solve the issue, continue down with Method 2 and then to Method 3 if the second tactic fails. Let’s begin.

Method 1: Disable Windows Media Features

Keep in mind that depending on the Windows 10 variation that you’re using, you might or might not have the Media feature pack pre-installed on your system. And even if the Windows Media Player pack didn’t come preinstalled, there are a lot of reasons why you’ll want to install it on your system.

Note: Keep in mind that if you’re using Windows 10 N, the Windows Media Pack will come preinstalled.

If you previously discovered that the Spring Creators Update (version 1803) fails because of the Windows Media Player package, the steps below will allow you to overcome the issue. Please follow the steps below to disable the Windows Media Player features from Windows Features and install the Spring Creators Update (version 1803):

Note: Keep in mind that when compared to Method 2, the steps below will only disable Windows Media Player (not uninstall it from your system). While some users have reported that this is enough to allow the Spring Creators Update (version 1803) go through, some users have only managed to resolve the issue after uninstalling Windows Media Player completely (Method 2).

  1. Press Windows key + R to open up a Run command. Then, type “optionalfeatures.exe” and hit Enter to open the Windows Features wizard.
  2. Wait until the Windows Features list is fully populated, then expand the Media Features folder.
  3. From the Media Features folder, uncheck Windows Media Player and hit Yes and then Ok to save the changes.
  4. Once the Windows Features dialog has been closed, reboot your computer to cement the changes and attempt to apply the Spring Creators Update (version 1803) at the next startup.
Читать еще:  Как включить Блютуз на ноутбуке Windows 10

Note: If the installation completes successfully, return to Windows Features and re-enable Windows Media Player since you might need it in the future. If you’re using Windows 10 N Edition (or KN Edition), you can download and install the latest version of Windows Media Player directly from this link (here).

In the event that the installation of the Spring Creators Update (version 1803) is still failing, leave Windows Media Player disabled and continue with Method 2 to uninstall all related components from your computer.

Method 2: Uninstall Windows Media Player From the Settings menu

If disabling Windows Media Player (Method 1) didn’t allow you to install the Spring Creators Update (version 1803), let’s see whether uninstalling Windows Media Player will allow you to apply the update.

Here’s a quick guide to uninstalling Windows Media Player from the Settings menu:

  1. Press Windows key + R to open up a Run box. Then, type “ms-settings:optionalfeatures” and hit Enter to open the Manage Optional Features tab of the Windows 10 Settings Menu.
  2. Under Manage optional features, scroll down through the list, click on Windows Media Player and hit the Uninstall button.
  3. Wait until Windows Media Player is uninstalled, then restart your computer.
  4. At the next startup, try to re-apply the Spring Creators Update (version 1803). If it’s still failing with the same error, move down to the final method.

If you manage to install the missing update, you can reinstall Windows Media Player by returning to the Manage Optional Features screen and clicking the Add a feature button. Then, simply browse for Windows Media Player and hit the Install button.

Method 3: Deactivating Windows Media Player via PowerShell

If you’re still unable to install the Spring Creators Update (version 1803), one final potential fix would be to turn Windows Media Player off via an elevated PowerShell window.

Here’s a quick guide to deactivating Windows Media player from an elevated Powershell window and then reinstalling the Spring Creators Update (version 1803):

  1. Press Windows key + X and click on Windows PowerShell (Admin) to open up an elevated Windows PowerShell window.
  2. In the elevated Powershell prompt, paste the following command to disable Windows Media Player:
    Disable-WindowsOptionalFeature –FeatureName “WindowsMediaPlayer” -Online
  3. If the command is successful, close the elevated Powershell prompt and restart your computer. At the next startup, see whether you can apply the Spring Creators Update (version 1803).

If the installation is successful, you can open another elevated Powershell window and re-enable Windows Media Player by inserting the following command:

Error Code 0x800f081f Solutions

To fix the error code 0x800f081f on Windows 10, use the below methods –

1. Configure Your Group Policy Editor

In order to resolve this error code, you can try to configure the Group Policy Editor and check if it solves the problem. It is possible that your group policy affects the operating system ability and activates the installation. One thing here you should note is that the group policy is natively available on Education, Pro, and Enterprise version of Windows 10. Hence, if you have the version that is mentioned here, you can go with this solution.

  • Click on the Start button, type “ gpedit.msc “, and then hit Enter to open the Local Group Policy Editor.
  • In the Group Policy window, navigate to the following location –
  • Select System and then move your attention to the right side of the screen.
  • Scroll down until you find the entry entitled Specify settings for optional component installation and component repair options.
  • Once you see the entry, double click on it and then select Enabled from the next pop-up window.
  • Now click Apply and then OK button to save the changes.

After following the above steps, check for the error code. If it’s still persisting, move down and try the next workaround.

2. Enable the .NET Framework using DISM

This method is one of the best and easiest solutions that ask you to run the DISM command tool to enable the .NET Framework. Here are the steps you can try:

But before you go to the steps, make sure you have an ISO image of your current operating system. In case you don’t have one, you can use the Media Creation tool to download and install Windows ISO.

Now open the elevated command prompt and type the following commands:

Dism /online /enable-feature /featurename:NetFx3 /All /Source:[Drive]:sourcessxs /LimitAccess

Press enter to run the command line. Once it completes the execution process, the .NET 3.5 will be enabled.

After configuring the group policy editor, check for the error code. If it’s still persisting, continue with the next workaround.

Читать еще:  Как исправить ошибку 5 "отказано в доступе" на Windows (Виндовс)?
Tip: This method is also applicable to fix the error code 0x800F0922.

3. Reinstall Microsoft .NET Framework 3.5

If the above solutions don’t work, you can finally re-install the .net 3.5 Windows 10 to solve the error code. To do it, follow the instructions given below –

  • First of all, open Control Panel on your Windows 10 PC.
  • Select Programs and Features from the available items.
  • From the left side panel, select Turn Windows features on or off.
  • In the Windows Features dialog box, click the checkbox next to .NET Framework 3.5 (includes .NET 2.0 and 3.0).

Reinstall Microsoft .NET Framework 3.5

  • Now click the OK button to save the changes. This may take a while to complete the installation process therefore wait patiently.

After completing the installation process, the problem should be resolved now. Check if the error code 0x800f081f still appears.

Reset Windows Update Components

I hope the error 0x800f081f must have been resolved by now. In case it still appears, this must be because of corrupted update components. To fix it then, you need to stop and restart all update-related services. While stopping/restarting services, make sure to purge two cache folders i.e. SoftwareDistribution and Catroot2. You may follow this tutorial on how to reset update components.

A manual installation of recent cumulative updates may also find and fix any reasons that are triggering an error code 0x800f081f on your PC.

How to Fix Error Code 0x800F081F: A Summary

To fix error code 0x800F0922 on Windows 10:

  1. Open the Group Policy Editor.
  2. Go to Computer Configuration > Administrative Templates > System.
  3. Double-Click on Specify settings for optional component installation and component repair.
  4. Select Enable.

If that doesn’t work, follow these instructions instead.

  1. Create and mount a Windows 10 ISO image.
  2. Open Command Prompt as an administrator.
  3. Type ism /online /enable-feature /featurename:NetFx3 /All /Source:[Drive]:sourcessxs /LimitAccess (replacing [Drive] with the appropriate letter).
  4. Press Enter

How To Install .Net Framework 3.5 On Windows 10

Windows 10 comes with .NET framework 4.5 pre-installed, but many apps developed in Vista and Windows 7 era require the .NET framework v3.5 installed along with 4.5. These apps will not run unless you will install the required version. When you try to run any such app, Windows 10 will prompt you to download and install .NET framework 3.5 from the Internet.

Enable .NET Framework 3.5 on Demand while application install

If an app requires the .NET Framework 3.5 but doesn’t find that version-enabled on your computer, it displays the following message box, either during installation, or when you run the app for the first time. In the message box, choose to Install this feature to enable the .NET Framework 3.5.

Enable .NET Framework 3.5 on Demand

This option requires an Internet connection.But some Times While enabling .net framework 3.5 on windows 10 computers this fails to complete with showing different error codes like windows could not complete the request changes. Error 0x800F0906 and the error should be 0x800F081F.

Enable the .NET Framework 3.5 in Control Panel

Also, you can Enable this through windows programs and Features. To Enable The .net Framework 3.5 Feature in windows move to Control Panel -> Programs and Features -> Turn Windows features on or off option. here select .NET Framework 3.5 ( include 2.0 and 3.0 )

Enable net Framework 3.5 Feature

And click ok this will install or enable the Net Framework 3.5 Feature. But sometimes During Enabling the Feature you will see following Error message Windows couldn’t connect to the internet to download necessary files. Make sure that you’re connected to the internet and click ‘Retry’ to try again. Error code 0x800F0906, 0x800f0907, or 0x800f081f.

If you are also suffering from This Error and unable to install .net Framework 3.5 on windows 10 computer. Here we have a simple and 100 % working Tip which fix this issue.

Net Framework 3.5 0x800f081f Installation Error (Solved)

The Net Framework 3.5 0x800f081f installation error occurred on a Windows 10 based computer, because Windows cannot find or download the required files that needed to install .NET Framework 3.5. The error 0x800f081f appeared after turning on the .NET Framework 3.5 in Windows features.

Problem description: .NET Framework 3.5 cannot be installed on a computer running Windows 10 or Windows 8/8.1 and the installation of the NET Framework 3.5 is terminated with error code 0x800f081f: «Windows couldn’t complete the requested changes. Windows couldn’t find required files to complete the requested changes. Make sure you ‘re connected to Internet, and try again.»

Net Framework 3.5 0x800f081f Installation Error

This tutorial contains instructions to resolve the Net Framework 3.5 installation error 0x800f081f in Windows 10/8/8.1.

How to FIX: Error 0x800f081f during NET FRAMEWORK 3.5 installation.

Important: Before proceeding to the methods below, navigate to ‘Services’ panel (Control Panel > Administrative Tools > Services), and make sure that the ‘Windows Update’ service is running. If the service is not running the double click on it, and set the Startup type to Automatic. Then click OK and restart the computer. After restart try to install the .Net Framework. If the problem, exists, then continue to the methods below: *

Читать еще:  В Windows 10 используется не вся оперативная память

* Note: Apply the methods below only if you face the error 0x800f081f, after enabling the .Net Framework 3.5 feature from Windows Features. (Control Panel -> Programs and features -> Turn Windows features on or off.)

install net framework 3.5 windows 8 and 10

Method 1. Remove .NET FRAMEWORK 4.7 and then Install .NET FRAMEWORK 3.5.

1. Open Programs and Features and then click Turn Windows features on or off.
2. Uncheck the .NET Framework 4.7 checkbox and click OK to remove the latest installed version of NET FRAMEWORK.

disable net framework windows 10

3. When the removal process, enable the .NET Framework 3.5 and click OK.

install net framework 3.5 windows 10

4. Follow the on screen instructions to download to install the .NET FRAMEWORK 3.5.
5. If the installation is complete this time without problems, then re-enable the NET Framework 4.7.

enable net framework 3.5 windows 10

Method 2. Install NET FRAMEWORK 3.5 using DISM.

Requirements: In order to fix the “Net Framework 3.5 installation error 0x800f081f” you need a Windows installation media. If you don’t own a Windows installation media then run the Microsoft’s Media Creation tool and download a copy of your Windows version in a ISO format.

1. Attach (or mount the Windows.ISO) the installation media to your computer.
2. Open Windows Explorer and note the drive letter of the Windows media.
3. Open Command Prompt as Administrator. To do that:

command prompt administrator

4. In command prompt type the following command and press Enter: *

  • DISM /Online /Enable-Feature /FeatureName:NetFx3 /All /LimitAccess /Source: X :sourcessxs

* Notes :
1. Replace the » X » letter on the above command according the drive letter of the Windows media. (e.g. If the Windows Media drive letter is «E» then you have to type: «DISM /Online /Enable-Feature /FeatureName:NetFx3 /All /LimitAccess /Source:E:sourcessxs»
2. If the command fails with error «0x800f081f: the source files could not be found» then open Windows Explorer and ensure that the ‘Source’ path » X :sources» is correct. If you see the «x86» and the «x64» folders in the root directory of the mounted installation media, then modify the ‘Source’ in the DISM path accordingly. e.g.

  • DISM /Online /Enable-Feature /FeatureName:NetFx3 /All /LimitAccess /Source: X :x64sourcessxs

install framework 3.5 dism

Method 3. Install NET FRAMEWORK 3.5 from PowerShell.

Requirements: In order to solve the “Net Framework 3.5 installation error 0x800f081f” you need a Windows installation media. If you don’t own a Windows installation media then run the Microsoft’s Media Creation tool and download a copy of your Windows version in a ISO format.

1. Attach (or mount the Windows.ISO) the installation media to your computer.
2. Open PowerShell as Administrator. To do that:

powershell administrator

3. At PowerShell give the following command and press Enter.

  • Enable-WindowsOptionalFeature –Online –FeatureName «NetFx3» –Source X :sourcessxs -LimitAccess

* Notes:
1. Replace the » X » letter on the above command according the drive letter of the Windows Installation media.
2. If the command fails with error «0x800f081f: the source files could not be found» then open Windows Explorer and ensure that the ‘Source’ path » X :sources» is correct. If you see the «x86» and the «x64» folders in the root directory of the mounted installation media, then modify the ‘-Source’path accordingly. e.g.

  • Enable-WindowsOptionalFeature –Online –FeatureName «NetFx3» –Source X :x64sourcessxs -LimitAccess

install framework 3.5 powershell

Method 4. Repair Windows 10.

The final method to resolve the .NET Framework 3.5 0x800f081f installation error, is to repair Windows 10 with In-Place Upgrade.

That’s all folks! Did it work for you?
Please leave a comment in the comment section below or even better: like and share this blog post in the social networks to help spread the word about this solution.

  1. Нажимаем клавиши Win+R и в появившемся окошке вписываем сочетание taskschd.msc, затем ОК;
    taskschd msc
  2. Итак, у нас открылся «Планировщик заданий», в нём нам нужно перейти по следующему адресу: – «Microsoft» – «Windows» – «Servicing»;
  3. После этого, необходимо кликнуть ПКМ по строке «StartComponentCleanup» и в ниспадающем меню выбираем вкладку «Выполнить», для запуска процесса очистки. Обычно подобная операция выполняется 10-20 секунд. Разумеется, всё зависит от железа вашего ПК и ПО, которое на нём установлено. В этом случае времени на очистку может уйти больше.
    планировщик заданий выполнить 5

Чтобы запустить командную строку в поиск Windows нужно ввести команду cmd, затем по возникшему файлу нажмём ПКМ и в выпадающем меню выберем «Запуск от имени администратора».
cmd запуск администратор

Теперь мы видим черное окно, куда нам необходимо ввести следующее сочетание без кавычек: «dism /online /cleanup-image /startcomponentcleanup». Эта опция ответственна за очистку обновлений с проблемами, которые вы до этого установили. Нажимаем «Ввод».
командная строка

После проведённых операций нам нужно провести проверку «Центра обновлений». Перезагружаем ПК и пытаемся провести обновление. Если у вас с интернетом порядок, а на ЖД хватает незанятого пространства, то вы обновите систему успешно.

Вывод: 0x800f0988 в Windows 10 как исправить вы теперь знаете. Главное, наличие интернета и свободного пространства на ЖД. В это случае, у вас всё должно пройти отлично. Успехов!

голоса
Рейтинг статьи
Ссылка на основную публикацию
ВсеИнструменты
Adblock
detector